Spices Shelves
![IMG_20190423_213701.jpg](/proxy/?url=https://content.instructables.com/F6F/7C6N/JUSNFR8A/F6F7C6NJUSNFR8A.jpg&filename=IMG_20190423_213701.jpg)
![IMG_20190423_213734.jpg](/proxy/?url=https://content.instructables.com/FJI/V2YY/JUSNFR8G/FJIV2YYJUSNFR8G.jpg&filename=IMG_20190423_213734.jpg)
I love to cook, so like every other amature "Chef" I have a lot of spices in the kitchen
It's mandatory to have spices- and lots of them if possible.
So in this cool project i built from scratch wood shelves made from pine tree and a coating of scim coat
Hope u enjoy
Cut the Sides and Bottom Wood
![IMG_20181226_141337.jpg](/proxy/?url=https://content.instructables.com/FF4/IR2C/JUSNFQA6/FF4IR2CJUSNFQA6.jpg&filename=IMG_20181226_141337.jpg)
Measure the desired size of the shelves ( mine is 60 cm length )
i didn`t had a proper size of wood- so i attached two together - applied wood glue and let it stick for a few hours
Clamps
![IMG_20181226_145002.jpg](/proxy/?url=https://content.instructables.com/FMJ/561X/JUSNFQEJ/FMJ561XJUSNFQEJ.jpg&filename=IMG_20181226_145002.jpg)
![IMG_20181226_142250.jpg](/proxy/?url=https://content.instructables.com/FGZ/DTXQ/JUSNFQDN/FGZDTXQJUSNFQDN.jpg&filename=IMG_20181226_142250.jpg)
![IMG_20181227_175634.jpg](/proxy/?url=https://content.instructables.com/FP1/39PZ/JUSNFQLY/FP139PZJUSNFQLY.jpg&filename=IMG_20181227_175634.jpg)
![IMG_20181226_142245.jpg](/proxy/?url=https://content.instructables.com/FPH/C0PM/JUSNFQBA/FPHC0PMJUSNFQBA.jpg&filename=IMG_20181226_142245.jpg)
I used clamps to hold the two pieces together and attached the sides also ( using screws from the bottom )
Seal the Gap
![IMG_20181226_164144.jpg](/proxy/?url=https://content.instructables.com/FRC/LYXL/JUSNFQFC/FRCLYXLJUSNFQFC.jpg&filename=IMG_20181226_164144.jpg)
![IMG_20181227_174143.jpg](/proxy/?url=https://content.instructables.com/F4I/XXNC/JUSNFQJX/F4IXXNCJUSNFQJX.jpg&filename=IMG_20181227_174143.jpg)
I needed to seal the gap between the two boards - used wood filler for that
Attach Rear Hanging Bracket
![IMG_20181228_130946.jpg](/proxy/?url=https://content.instructables.com/F2M/DFHK/JUSNFQQQ/F2MDFHKJUSNFQQQ.jpg&filename=IMG_20181228_130946.jpg)
In order to attach it to the wall i added an aluminum bracket from on the back
Apply Skim Coat #1
![IMG_20181228_131231.jpg](/proxy/?url=https://content.instructables.com/F3B/N0XS/JUSNFQRM/F3BN0XSJUSNFQRM.jpg&filename=IMG_20181228_131231.jpg)
![IMG_20181228_131351.jpg](/proxy/?url=https://content.instructables.com/FM7/4D09/JUSNFQSK/FM74D09JUSNFQSK.jpg&filename=IMG_20181228_131351.jpg)
I could have just paint it using a regular paint, but i just love the texture of this material - it`s like rough but still gives it a good look
Apply Skim Coat #2
![IMG_20181228_133104.jpg](/proxy/?url=https://content.instructables.com/FUK/HM4E/JUSNFQXH/FUKHM4EJUSNFQXH.jpg&filename=IMG_20181228_133104.jpg)
![IMG_20181228_131817.jpg](/proxy/?url=https://content.instructables.com/FK8/3N8I/JUSNFQVT/FK83N8IJUSNFQVT.jpg&filename=IMG_20181228_131817.jpg)
![IMG_20181228_134156.jpg](/proxy/?url=https://content.instructables.com/FK0/P5NC/JUSNFR03/FK0P5NCJUSNFR03.jpg&filename=IMG_20181228_134156.jpg)
Continue applying it and after 10-15 min run over it with something thick such as wood ( or old credit card ) that way you can give it it`s final appearance
Wrap Front Roll
![IMG_20181228_210526.jpg](/proxy/?url=https://content.instructables.com/FOA/I3YK/JUSNFR4T/FOAI3YKJUSNFR4T.jpg&filename=IMG_20181228_210526.jpg)
![IMG_20181228_205554.jpg](/proxy/?url=https://content.instructables.com/FZ5/0I7J/JUSNFR1S/FZ50I7JJUSNFR1S.jpg&filename=IMG_20181228_205554.jpg)
![IMG_20181228_205558.jpg](/proxy/?url=https://content.instructables.com/F8I/B62N/JUSNFR2W/F8IB62NJUSNFR2W.jpg&filename=IMG_20181228_205558.jpg)
wrapped the front stick with some black sticker ( Carbon ) - but over time it just fell off - so off it goes
Attach to Wall
![IMG_20181229_175212.jpg](/proxy/?url=https://content.instructables.com/FUV/JO51/JUSNFR5S/FUVJO51JUSNFR5S.jpg&filename=IMG_20181229_175212.jpg)
Drill the holes and your done!
Hope u enjoy!