Spartan / Corinthian Helmet

by aziz2424 in Workshop > 3D Printing

268 Views, 0 Favorites, 0 Comments

Spartan / Corinthian Helmet

Screen Shot 2022-01-12 at 11.25.55.png
Screen Shot 2022-01-12 at 11.27.54.png

I made a Spartan helmet.

Supplies

3D Printer

3D designing software: Tinkercad was used in this project.

Paint : Red, gold, yellow, brown. Acrylic was used for this project.

Top Part of the Helmet.

Screen Shot 2022-01-12 at 11.54.32.png
Screen Shot 2022-01-12 at 12.17.20.png
Screen Shot 2022-01-12 at 12.19.02.png

Add a hemisphere. Add a ring that stands vertically. Align it with the hemisphere.


Cut off a bit more than half of the ring. Then copy and paste the ring twice. Make the second ring to the top a bit wider. Then make the top ring bigger and slimmer. It should look like the picture above.

General Parts

Screen Shot 2022-01-17 at 11.40.18.png
Screen Shot 2022-01-17 at 11.37.32.png
Screen Shot 2022-01-17 at 11.38.32.png
Screen Shot 2022-01-17 at 11.39.10.png
Screen Shot 2022-01-17 at 11.39.38.png

The final piece has 4 main parts.


First the face shield. This is made by adding a cylinder and adding a cylinder hole in it. Then adding a diagonal hole to make the shape.


This earpiece is made with 3 cylinders. Adjust them so that it becomes smaller as they go out.

Then adjust the beveling on each of them. Make a copy of this for the other side of helmet.


The back head cover is made by adding a cylinder. Add a cylinder hole in the center. Cut half of the cylinder. Add a final hole diagonally to the piece.


The ring is a plain ring.


Then combine all the pieces together.

Cutouts for the Face

Screen Shot 2022-01-17 at 12.24.48.png

Making the cutouts requires a few hole shapes. It requires two circles, two squares and a semicircle. Adjust them in the positions as shown.






Done

Screen Shot 2022-01-17 at 21.38.50.png

Group everything together and you are done.