Space Scene

A space scene I made for the make it float contest

Tinkercad

1. First make a large rectangle colored dark purple( I personally used 22013e) that covers the entire baseplate.
2. Change the rectangles height to 5mm.
3. Place partially into floor.
4. Create a small 5 by 5 by 5 sphere.
5. Copy and paste that sphere and move the copy away. Select only the spheres and repeat until you have as many stars as you want.
6. Take some of the spheres and move them up and around.
7. Select the spheres at random and change their colors randomly as well
8. Move the spheres so they aren’t too dense and put some in the floor rectangle.
9. Stars complete

1. Insert a cylinder. Increase its bevel and segments to max.
2. Add a head shape of your choice. I chose an oval. I made a second example one with a rectangle head.
3. Place the head on top of the cylinder, set both to white
4. Copy and paste the head, set it to blue, and shrink it.
5. Stick the smaller blue shape into the head partly sticking out.
6. Bundle the parts together
7. Insert a square. Increase the radius to 5.
8. Make the square thinner.
9. Attach the square to the back of the cylinder.
10. Raise all previous parts into the air.
11. Copy the cylinder and decrease it to 10 by 10 by 10. This will be a limb
12. Place the limb partially intersecting the cylinder’s bottom with its top corner.
13. Copy the limb and do the same on the other side.
14. Copy it again and move it up to intersect the cylinder with part of the edge.
15. Do it again on the other side.
16. You should have something like The image above
17. The head may differ depending on the shape you chose
18. Group it together in a bundle
19. Scatter astronauts through the scene resizing and rotating them to show distance and orientation.

Finally place 2 large rectangles the same color as your floor to act as a backdrop.