South Pacific Wash Station

we first had to find out how big the laundry cart had to be.

• we had to use a pact screw jig.

• we then made the frame 4´11´´x 3´0´´ and attached the wood together

• after we made the frame we attached the casters to the bottom of the frame then we attached the metal roofing to the front and sides.
• after attaching the roofing we used red, blue, and a little black to make the metal rusted

• then we attached a 1/2 thick piece or ply wood on top of the frame then gigged out a 1ft hole the the plywood.

• we then placed 4ft11inx3ft strip of bamboo.
• than we panted and attached a tub of PVC.
• we then attached two pieces of 1x4 on the inside of the hole.

• we than tied three bamboo rods together twice and attached them tho the back with plummer´s strap .

• we then used black paint on a 2ft long PVC pipe.
• we than attached the PVC by drilling a pilot hole and a 3in screw .
• we then used a stencil and black spay paint

• we then used spray on foam (caution: this is vary sticky and hard to get out of cloths and skin)
• after that dried we painted the foam white.
• than we made a sign.

now you can enjoy your creation.