Soup Can Marudai

by rebuilt in Craft > Jewelry

1078 Views, 6 Favorites, 0 Comments

Soup Can Marudai

temp_-645542548.jpg
I've been wanting a marudai for a long while now, but couldn't justify the cost of one. so I turned to the recycling bin.

temp_688731396.jpg
temp_-323964876.jpg
I used 5 soup cans and cut booth ends out if three and one end on the other 2

temp_750864515.jpg
temp_1953843487.jpg
next crimp one end of each can exept the bottom one. stack them together and duct tape together.

temp_244267777.jpg
temp_-1686894728.jpg
lastly cut a hole in the top, and access holes along the sides. I ended up lining all cuts with duct tape cause my metal work is terrible :) I added a kumihimo disk to the top of mine cause I like having the small notches, but its not necessary.