Sony Ericsson USB HUB

by wardyboyo in Circuits > USB

5055 Views, 1 Favorites, 0 Comments

Sony Ericsson USB HUB

DSC00441.JPG
make a usb hub for you se phone

Stuff You Need

havent got a picture for this step but you need:
an LED
SE phone
2 position switch
SE usb data cable
housing for it all

Cut the Wire

DSC00415.JPG
cut your data cable and strip the 4 wires inside

Connect the LED

DSC00416.JPG
connect the positve leg of the led to the black wire and the negative to the red wire

Connect the Switch

DSC00439.JPG
conect the switch

Get the Housing

DSC00418.JPG
DSC00419.JPG
i used an old home hub phone base

Cut the Holes and Put in All In

DSC00433.JPG
DSC00436.JPG
DSC00437.JPG
cut a hole on the front for the LED and a hole on the top for the switch
you can do this witha craft knife

The Finished Product

DSC00441.JPG
once its all connected all you gotta do is plug it in the usb port out the phone on and flick the switch and evryones a winner