Solid State Air Conditioner With Old Bitcoin Hardware Ver. 2

Version: 2

Solid State Air Conditioner with Old Bitcoin Hardware

Video will show all step needed to complete this project.

Parts from Old Bitcoin Hardware:

2x - Fan

2x - Heatsink

Other Parts:

1x - Huge TEC1-12730 253W Thermoelectric Peltier Cooler

1x - Aluminum Block

1x - 10a DPDT Switch

2x - Veriable Speed Controller

8x - Styrene Sheets 1.0mm Thick

8x - Foam Sheets

YOU NEED TO MAKE 2ND ONE

Glue Styrene and Foam Sheet together cut the the excess foam

Measure the Heatsink size and cut away the foam, then fold the Styrene sheet

Glue Sheets to the Heatsink and make Fan box

Glue the fan to the box and seal with Copper Tape

Make space on the heatsink and 2-3 layer of copper tapes for the Positive and Negative wire

Solder the Peltier to the Copper Tapes

MAKE SURE YOU ADD THE ALUMINUM BLOCK ON THE PELTIER