Emergency Hidden Solder Iron (for Candles)
by usmiv4o in Workshop > Tools
680 Views, 0 Favorites, 0 Comments
Emergency Hidden Solder Iron (for Candles)
Its highly conceilable fast and usefull. Made easy. Ready in 15 sec.
Supplies
Solder iron made easy from 3 parts:
1. Copper 5 cm long
2. Antena from old radio
3. Handle from steel wire.
For operations you will need:
1 candle
2 aspirin pill
3 lighter
1. Copper 5 cm long
2. Antena from old radio
3. Handle from steel wire.
For operations you will need:
1 candle
2 aspirin pill
3 lighter
Solder Iron Assembled
All three parts when assembled.
Put copper wire inside antena pipe with same diameter. I grinded it a little to be able to fit inside. At the other end put steel wire with same diameter.
Put copper wire inside antena pipe with same diameter. I grinded it a little to be able to fit inside. At the other end put steel wire with same diameter.
How to Use
Use it with candle.
Put the flame only to copper.
Clean copper part for best effect.
I use it for years, becouse of easy conceilability and travel sizes.
It works great, heats fast - in about 15 sec.
Its usable with other sources of flame like alcohol.
I have made upgrade to electric for stationary use - just one old fuse(ceramic) and heater wire (cantal) from old water heater. Only 24 volts, becouse of open wires.
On last picture - hidden inside pen.
Put the flame only to copper.
Clean copper part for best effect.
I use it for years, becouse of easy conceilability and travel sizes.
It works great, heats fast - in about 15 sec.
Its usable with other sources of flame like alcohol.
I have made upgrade to electric for stationary use - just one old fuse(ceramic) and heater wire (cantal) from old water heater. Only 24 volts, becouse of open wires.
On last picture - hidden inside pen.