Solar Electric Trike
by snotty in Workshop > Electric Vehicles
10867 Views, 55 Favorites, 0 Comments
Solar Electric Trike
Convert an electric scooter to a trike. And then make it solar for extra awesomeness.
This is not my project. It is by a guy I see around. I interviewed him and took some pictures. There is enough information here to get you started if you have some hand tools and curiosity.
Remember to leave a comment :)
This is not my project. It is by a guy I see around. I interviewed him and took some pictures. There is enough information here to get you started if you have some hand tools and curiosity.
Remember to leave a comment :)
What You Need
Tools:
Drill
Wrenches and screwdrivers
Hacksaw or maybe an angle grinder
Welder. Oh, you don't have a welder? Now you do.
Materials:
Electric scooter, or maybe any bicycle would work fine.
~1/4" x 2" angle aluminum
~3/4" steel square pipe
Angle iron (you decide how strong it should be)
Scrap steel pieces
Front suspension from a small "quad" 4 wheeler.
Wheels with a thick (14mm?) axle. The axle must be strong enough to be supported on one side only.
Drill
Wrenches and screwdrivers
Hacksaw or maybe an angle grinder
Welder. Oh, you don't have a welder? Now you do.
Materials:
Electric scooter, or maybe any bicycle would work fine.
~1/4" x 2" angle aluminum
~3/4" steel square pipe
Angle iron (you decide how strong it should be)
Scrap steel pieces
Front suspension from a small "quad" 4 wheeler.
Wheels with a thick (14mm?) axle. The axle must be strong enough to be supported on one side only.
Replace the Front End
Like I said, this is not my project so here is the info you need to get started. You'll have to figure some things out and share them in the comments.
-Remove front of scooter
-Extend the steerer tube or bar
-Attach an L bracket to the steerer tube
-Put ball-end bearings on the end of the L bracket
-Extend the main body of the scooter forward
-Make places to mount the front suspension from a quad
-Mount the quad suspension on there
-Make a bracket to hold the wheels out of thick angle aluminum
-Mount (ineffective) brakes on the angle aluminum.
-Remove front of scooter
-Extend the steerer tube or bar
-Attach an L bracket to the steerer tube
-Put ball-end bearings on the end of the L bracket
-Extend the main body of the scooter forward
-Make places to mount the front suspension from a quad
-Mount the quad suspension on there
-Make a bracket to hold the wheels out of thick angle aluminum
-Mount (ineffective) brakes on the angle aluminum.
Make It Solar
Stick on four 2a 12v solar panels in series and through a diode to trickle charge the batteries.
Enjoy!
It's cool! Chix digit.