Soda Can Wi-Fi

Have you ever been at home and the Wi-Fi doesn't work well. Get a better Wi-Fi signal from your router with this soda can trick. This project is super cheap and super easy and I guarantee you'll have a better Wi-Fi signal. Remember to please vote for me.

Materials

• Soda Can
• Hot Glue

Tools

• Metal Clippers
• Pliers
• Drill
• Hammer
• Hot Glue Gun
• Sharpie

Another thing you could do to the can is decorate it so that it doesn't look to tacky on your router.

1. Draw lines on the can as a guide for when you cut the can.
2. Draw on line around the top of the can and one around the bottom of the can.
3. Then draw a vertical line that stops at both of the circles.

1. Cut the top of the can off.
2. Then cut the vertical line stopping at the circle at the bottom.
3. After that cut 3 in into the can leaving one inch of metal to hold the top.

1. Put some Hot Glue on all the edges so that it is safe to touch.
2. Make a hole with the drill the size of the hole all depends on how wide your router antenna.
3. Finally put Hot Glue on the sharp edges of the hole

Put the soda can on the router and watch it give you better Wi-Fi signal. The Soda Can Wi-Fi is an easy and cheap way to get better Wi-Fi. If you are interested in making an even better way to get good Wi-Fi make a parable out of the soda can. I hope you enjoyed this and remember please vote for me!