Soap Renew

by KresimirPregernik in Craft > Soapmaking

2657 Views, 16 Favorites, 0 Comments

Soap Renew

DSC08982.JPG
Collect rests of used soaps, regardless of the sort, use old domestic gadget and scrub all this.

Mixing

DSC08983.JPG
Mix this to get uniformly mixture.

Soaking

DSC08986.JPG
Use a form which is heat resistant.  Add water (not to much), just to soak mixture.

Melting

DSC08988.JPG
Put this in oven:
Adjust temperature to max 100 C°. And let them to melt/heat, until bubbles arrive.  With metal stick you can stir and check if all is heated through. About 20-25 minutes total.

Put this in microwave:
Take a steps of 30 sec, constantly monitoring the  status, to reach bubbles pop out. With metal stick you can stir and check if all is heated through. About 5 steps....5 minutes total.

Cooling

DSC08989.JPG
Put this outside, to cool dawn. Form future looks. Wait until is cold and pick it out.  Its ready to use.

Forming

DSC08990.JPG
Or, until is still WARM - not HOT,  from with hands future appereance. 

Of course, you can experiment as you like! 

Sincerely yours,