Soap Dispenser
this is most likely the most useless thing you will ever make. it contains your soap boxes
Supplies
1 big cereal box
scissors tape
Step 1: Open Box
Cut along one edge
Step 2: Measure
Figure out how many soapboxes you want to fit in the dispenser. Then measure from the bottom of the box and not the bottom of the flap and make a line.
Step 3: Cut Along Line
Cut along that line duh
Step 4: Making Opening Part A
from the bottom of the board measure a bit over the height of your box and draw a line. Then to make slight indents on each side to take the soap out easily, go 1/2 inch and make a line.
Step 5: Making Opening Part B
cut along those lines duh
Step 6: Making the Correct Dimensions of the Box
Create a vertical line that is the box's length away from the boxes side
Step 7: Creating the Box
cut the right line and fold along the left line
Step 8: Tape It Together
tape it together and then you are good to go