SnowBoard
![Screenshot 2023-04-24 150433.png](/proxy/?url=https://content.instructables.com/FV0/BOX8/LGUUMMPG/FV0BOX8LGUUMMPG.png&filename=Screenshot 2023-04-24 150433.png)
![Screenshot 2023-04-24 150528.png](/proxy/?url=https://content.instructables.com/FT8/UUSJ/LGUUMMPV/FT8UUSJLGUUMMPV.png&filename=Screenshot 2023-04-24 150528.png)
This is where i show and explain the easy steps of creating a snow board in Fusion 360
The Sketch
![Screenshot 2023-04-24 150824.png](/proxy/?url=https://content.instructables.com/FZ6/FLRM/LGUUMMRI/FZ6FLRMLGUUMMRI.png&filename=Screenshot 2023-04-24 150824.png)
First you need to sketch the board out and even out the height and length of the board.
Fillling the Board Out
![Screenshot 2023-04-24 151131.png](/proxy/?url=https://content.instructables.com/F0V/PJ8B/LGUUMMU5/F0VPJ8BLGUUMMU5.png&filename=Screenshot 2023-04-24 151131.png)
Next I extruded the board to expand it so i could fillet it and smooth it out.
Making the Fillets
![Screenshot 2023-04-24 151241.png](/proxy/?url=https://content.instructables.com/FCL/HSKF/LGUUMMWZ/FCLHSKFLGUUMMWZ.png&filename=Screenshot 2023-04-24 151241.png)
I fillet the top and bottoms of the board where the snow would hit and the top of the lip so it goes down and through the snow smooth.
Desing/Stickers and Colors
![Screenshot 2023-04-24 151429.png](/proxy/?url=https://content.instructables.com/FF7/TSIC/LGUUMN3Q/FF7TSICLGUUMN3Q.png&filename=Screenshot 2023-04-24 151429.png)
For the final I just put a popular brand name on the bottom of the board to add something to but adding stickers and coloring you can do as I also did it to the top.