Snapchat Hands Free Hack
![Screenshot_1.png](/proxy/?url=https://content.instructables.com/F5N/NGR5/INGBEFEK/F5NNGR5INGBEFEK.png&filename=Screenshot_1.png)
Greetings, dear Snapchaters,
in this tutorial I want to show my simple solution for a "big problem" with Snapchat. For all you, who are using a Snapchat, you know very well that you need to hold your finger on the big grey button to record a video and snap it. iPhone has a solution for this (something with gestures bla bla), but I have not found a simple solution for Android phones, so I was thinking why not to solve this problem by using a hardware, not software.
Take a look at the other steps and you'll see what I meant.
I actually never needed to snap something and have both hands free, but I was planning to attach a phone to quadcopter and using most light equipment to trigger recording in mid air, I have never seen someone doing that, so why not to give a shot.
Parts
![13072944_878447468947476_555301728_o.jpg](/proxy/?url=https://content.instructables.com/FVP/OJQH/INGBEFC9/FVPOJQHINGBEFC9.jpg&filename=13072944_878447468947476_555301728_o.jpg)
All you'll need is:
-audio jack
-soldering iron (or not even that if you tie your wires together)
-coin
-wire
-electrical tape
Connecting the Circuit
![13091597_878447455614144_986526291_o.jpg](/proxy/?url=https://content.instructables.com/F7Y/VBX3/INGBEFCF/F7YVBX3INGBEFCF.jpg&filename=13091597_878447455614144_986526291_o.jpg)
![13072221_878447448947478_1558879675_o.jpg](/proxy/?url=https://content.instructables.com/F0X/NN9S/INGBEFCL/F0XNN9SINGBEFCL.jpg&filename=13072221_878447448947478_1558879675_o.jpg)
![13105815_878447435614146_915099211_o.jpg](/proxy/?url=https://content.instructables.com/FE7/RTN4/INGBEFCR/FE7RTN4INGBEFCR.jpg&filename=13105815_878447435614146_915099211_o.jpg)
Actually, main idea is to use ground connection from your headphones slot, it will simulate a press with a finger.
Usually green wire is a ground (-) and the other two are just left and right headphone, so connect the green wire with some longer one.
After you have done that, use electrical tape to make a contact between coin and wire, you can solder it too if is possible..
Make something like a stick from electrical tape, you'll use that as a switch, it will be located between coin and a screen. Idea is, that when you want to start recording just remove this peace of tape. You can use some wire or a string attached to it and then pull, be creative. :)
Assemble It
![Screenshot_2.png](/proxy/?url=https://content.instructables.com/FIG/35UJ/INGBELNS/FIG35UJINGBELNS.png&filename=Screenshot_2.png)
![Snapchat handsfree mode hack](/proxy/?url=https://content.instructables.com/FTJ/Q81P/INGBEEKN/FTJQ81PINGBEEKN.jpg&filename=Snapchat handsfree mode hack)