Smart Blind Stick

Hi guys I am Nandan from Jp nagar Nook. Today I and my partner Sandeep and Nikitha will show you how to make smart blind stick at home using arduino and ultrasonic sensor.

Project taken by you tube : https://www.youtube.com/watch?v=Jt_9HxOJ0d8

Materials:

PVC Pipe

9v Battery

Switch

Ultrasonic sensor

Arduino

Battery connector

Hot glue gun

Wire

Vibrator motor

White tape

Jumper wire

Nylon cable tie

Empty box

Take 3feet pvc pipe then cut in into 2.8 feet then take 2 bended pipe to make the holder then fix it with the help of hot glue as shown in the image.

Make two holes in the front of the empty box then fix the ultra sonic sensor in it. Then take the arduino board then fix it ti the other part of the empty box then take jumper wire and give the connection as shown in the image.

Take the vibration motor then fix it to the pvc pipe as shown in the image then connect the wires to the arduino the take battery and fix it with the help of the hot glue as shown in the image.

Find the attached code and circuit diagram.