Slide and Lock Loop II

This is an easy to adjust loop.

It works well as a light to moderate load lanyard loop.

I have not tried it with heavy severe loads.

Bring working end (WE) over the standing end forming a loop.

Bring WE under the loop.

Bring WE over the loop.

And under again.

Bring WE over the loop.

Bring WE over, under, over.

Slightly tighten

Pulling on A or a adjusts the size of the loop. Pulling on B and b at the same time locks the loop in place.

If you pull on bight A and take cordage from a1 or a2 you adjust the size of the loop