Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

In this lesson you will learn to make a skull shaped button. Let's get started!

1. Drag a Cylinder shape to the workplane.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Scale it to a height of 2mm and a diameter of 16mm.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Drag a Box shape to the workplane.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Scale it smaller to a height of 2mm and a size of 8mm x 8mm.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Drag a cylinder shape to the workplane and make it a hole.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Scale it smaller to a size of 2mm x 2mm. Move it to the location marked in orange.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Copy and paste the holes and move them to the areas highlighted in orange.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Drag a Box shape to the workplane and make it a hole.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Scale it smaller to a height of 2mm and a size of 1mm x 4mm.
2. Move it to the area marked in orange.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Copy and paste the Box holes and move them to the area highlighted in orange.
2. Don't forget you can adjust the Snap grid setting for more accuracy if needed.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Drag a Roof shape to the workplane.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Scale it smaller to a height of 3mm and size it to 3mm x 3mm.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Rotate and move the roof shape to the area marked in orange and make it a hole.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Select all the shapes and group them into a single object by clicking the Group button in the menu bar.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

Congratulations! You made it!