Skeleton Fountain

I made a skeleton puking fountain, and I made it because I thought it would be a cool project to make and it will make a great Halloween decoration.

Supplies:

55 gallon drum

black and florescent green spray paint

great stuff foam

5 foot skeleton

roll of plastic

wood stain

hose

water pump

zip ties

gorilla glue

inkscape (for the stencil)

Tools:

laser (for stencil)

heat gun (for molding the skeleton)

drill (for drilling the holes for the hose and pump)

I took a plain skeleton and wrapped it with some plastic and used a heat gun to form it. Once it was formed, I painted some stain on the skeleton to make it look aged.

I went on inkscape and created a stencil to be painted onto the barrel

It all started with just a pain 55 gallon drum. I used great stuff foam to make it look like acid is oozing from the top of the barrel. Once that was done I painted the barrel.

Then, I attached the skeleton to the barrel with zip ties by drilling a couple holes to go through, and attached the hose through another hole and up through the skeleton. Lastly, I hooked the pump up to make the final project.