Simple Pallet Book Shelf
![20150606_081530.jpg](/proxy/?url=https://content.instructables.com/FC3/INN7/IALX6V04/FC3INN7IALX6V04.jpg&filename=20150606_081530.jpg)
Hello today, we will continue with pallet.
I need a book shelf, so I will use some pallets to build it.
Lets go and when it's free is better.
Matérials
![20140619_222353.jpg](/proxy/?url=https://content.instructables.com/F4N/OF4C/IALX6V1C/F4NOF4CIALX6V1C.jpg&filename=20140619_222353.jpg)
![20150606_081708.jpg](/proxy/?url=https://content.instructables.com/FKG/ZHXO/IALX6V0A/FKGZHXOIALX6V0A.jpg&filename=20150606_081708.jpg)
You will need :
- pallets
- wood screws
- glue
- sandpaper
wooden pegs
hammer
- circular saw
Clean and Cut Pieces
![20140619_222427.jpg](/proxy/?url=https://content.instructables.com/FQ9/PX9U/IALX6V1E/FQ9PX9UIALX6V1E.jpg&filename=20140619_222427.jpg)
![20140619_222416.jpg](/proxy/?url=https://content.instructables.com/FXE/UC8R/IALX6V1D/FXEUC8RIALX6V1D.jpg&filename=20140619_222416.jpg)
![20140619_222454.jpg](/proxy/?url=https://content.instructables.com/FJA/1Y6D/IALX6V1F/FJA1Y6DIALX6V1F.jpg&filename=20140619_222454.jpg)
![20140619_222458.jpg](/proxy/?url=https://content.instructables.com/F5C/1OBE/IALX6V1H/F5C1OBEIALX6V1H.jpg&filename=20140619_222458.jpg)
After having disassemble the pallet, we clean the wood with a good sanding with sandpaper 80.
Then blocked again the holes with sawdust and glue wood. Then another sanding with sandpaper 200.
Now cut the boards to the desired length.
I have six boards 10 * 100 cm and 4 boards 10 * 50 cm
Assemble
![20150606_081530.jpg](/proxy/?url=https://content.instructables.com/F2D/VU5N/IALX6VS7/F2DVU5NIALX6VS7.jpg&filename=20150606_081530.jpg)
![20150606_081546.jpg](/proxy/?url=https://content.instructables.com/FQ1/M3YK/IALX6V05/FQ1M3YKIALX6V05.jpg&filename=20150606_081546.jpg)
![20150606_081553.jpg](/proxy/?url=https://content.instructables.com/F9G/0YO6/IALX6V07/F9G0YO6IALX6V07.jpg&filename=20150606_081553.jpg)
![20150606_081605.jpg](/proxy/?url=https://content.instructables.com/F55/24RM/IALX6V08/F5524RMIALX6V08.jpg&filename=20150606_081605.jpg)
![20150606_081620.jpg](/proxy/?url=https://content.instructables.com/F5R/9XRO/IALX6V09/F5R9XROIALX6V09.jpg&filename=20150606_081620.jpg)
Six boards 10 * 100 cm, I assembled them together with wooden pegs and wood glue to create 3 boards 20 * 100 cm.
Same with the four planks 10 * 50 cm which will give me two boards 20 * 50 cm.
After dry, I sanding again with 200 grid sandpaper.
And now I assemble the pieces with wood screws.
Then a coat of clear varnish to protect it all and it's over.
Total 5€ and 6 hours, it remains only to him found a place on a wall.