Simple Easy Knex Shelf: Build to Any Shape and Size U Want!

This is to show u how to build a strong knex shelf. See the first pic!!!

It can be adapted to any size, and u can also make it stronger.

See u in step 1!

This is important.

The first pic is my frame shape. U can build ur frame any shape u want, but dont make it too tall, or it miaght fall over, unless u make it wider. also, the bigger u make it, the more pieces it will take.

Once u have ur frame shape, u have to determine how strong to make ur shelf. It will be one grey rod from front to back. i built the frame 8 times for the amout of strength i need. But, if ur going to put something heavy, like books, on the shelf, u may want to build more layers. u could build enough layers to fit the entire grey rod. This would make it completely solid.

However many layers u do build, u will need to put spacers in between each layer unless its solid. With 8 layers, u need 2 greys in between all layers except the last one, and one blue on the end.

Now, add the grey rods in on every spot where there is a hole, like in the middle of a white snowflake. add the spacers in between the layers unless it is solid. Now cap off the ends with grey connecters.

on the bottom 2 corners, front and back, attach a yellow connector with a white rod on it to the grey rods instead of a grey endpiece. This adds stability. See pic 2! If u built it tall and skinny, add some long rods onto the yellow pieces, going outwards.

All done! post mods, questions, and pictures of ur completed model to give others ideas!