Simple Cardboard Pumpkin Decoration

by Barry Neeson in Living > Halloween

3285 Views, 36 Favorites, 0 Comments

Simple Cardboard Pumpkin Decoration

IMG_5953.JPG

Hi,

In this instructable i will show you how to make a simple pumpkin decoration, these are incredibly easy to make and can be done in about 5 minuetes

This instructable is also a bit of a revamp of one of my first instructables from last year and was also my first ever instructable to be featured so it feels quite nice to go back and update it and i hope you enjoy the update

Tools and Materials

IMG_5927.JPG

Materials

1 A4 sheet of orange card or heavy weight paper

1 bit of black card or heavy weight paper

1 bit of green card or heavy weight paper (not pictured)

a toilet roll tube

Glue dots or double sided tape

Tools

Scissors

Pencil if you want to draw out the eyes etc before cutting them out

Cutting It Up

IMG_5928.JPG
IMG_5929.JPG
IMG_5930.JPG
IMG_5931.JPG

Take your A4 piece of orange card and cut it in half across its shortest length so you get 2 A5 sized pieces

in the same direction cut them in half again

and again

and again

Until you have 16 strips about a centimeter in width

Sticking Them On

IMG_5932.JPG
IMG_5933.JPG
IMG_5934.JPG
IMG_5935.JPG
IMG_5936.JPG
IMG_5937.JPG
IMG_5940.JPG
IMG_5938.JPG
IMG_5939.JPG
IMG_5943.JPG

Take a strip of the orange card and put a glue dot at both end on the same side of the card/

Stick one end at the top of your toilet role tube so it stick up away from you.

Curve the strip it back down on itself and stick it to the opposite end of the tube to it forms a handle shape.

Repeat this all the way round the outside of the tube with 8 of your strips.

Now take your remaining 8 strips and attach one end to the inside of the tube, placing it so that it overlaps 2 of the outside strips.

Then curve the strip so that its other end sticks inside the opposite end of the tube.

Repeat this all the way round the inside of the tube with the remaining 8 of your strips.

Finishing Touches

IMG_5944.JPG
IMG_5945.JPG
IMG_5946.JPG
IMG_5952.JPG
IMG_5951.JPG
IMG_5950.JPG
IMG_5953.JPG

Cut out eyes, nose and mouth from your black card and attach them with glue dots.

take a bit of green card and cut it into spikes. roll it into a tube and attach it inside the tube with glue dots.

Curve the "leaves" out a bit and tadah!

Quick and easy pumpkin decoration.

I hope you enjoyed this instructable and please feel free to leave any comments, questions or pictures of your own pumpkins below.

Happy Halloween