Simple Wide Belt Sander for Wooden Strips

Material:

1 multilayer wood 230x300x15

1 multilayer wood 300x60x15

2 multilayer wood 70x25x15

1 hinge 50x40

1 screw M8x70

1 abrasive buffer

1 drill support

Mount the hinge on the two pieces of multilayer (70x25 & 300x60) like in the pictures.

Screw in the two previous pieces on the basis of 230x300 like in the pictures

On the opposite side to the hinge execute a threaded hole M8

Mount the abrasive buffer on the drill and place it. With two screws fix the support.

Fix at the base the second piece (70x25) in front of the Support. Fix the support with two screws.

Insert the screw in the hole at the base. This screw allows adjustment of the thickness.

Lock the drill in the support and check the parallelism between the abrasive buffer and the adjustable base.

The wide belt sander machine is ready. Perform small thickness reductions.