Simple Wood Succulent Stand

We did a porch refresh which included building a stand so that we could grow and enjoy a dozen succulents. The stand holds the plants and also provides a bit of hidden storage AND, hides a bunch of cords out of sight.

• (3) Everbilt 2 in. Zinc-Plated Inside Corner Brace (4-Pack)
• Milwaukee 4 in. Hole Dozer Bi-Metal Hole Saw
• Olympic Elite 1 gal. Chestnut Brown Solid Advanced Exterior Stain and Sealant in One
• Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Gen II 18-Gauge Brad Nailer
• 1x6 board
• 1x8 board

For the latest project from us, join our email newsletter here!

The measurements for this stand were based on the size terra cotta pots we purchased. We laid the pots upside down to determine their positions and ultimately how long we wanted each board. Below is our cut list.

Cut list
Top and Sides

• 1x6 board (3) cut to 26”
• 1x6 board (2) cut to 61”

Bottom

• 1x8 board (4) cut to 26” + thickness of 1x6 board
• 1x6 board (1) cut to 26”

Once the boards were cut, the pot placement was marked and cut with a 4-inch hole saw.

The pots were primed with grey DecoArt gesso. The final color, DecoArt Acrylic in dark turquoise, was based on the pillows we used on the porch. Be sure to paint the bottoms of the pots as they will be visible.

This could have been assembled using a number of types of joinery, but we are using wood glue and corner brackets to add the shelves to the sides. The unit is stained with Olympic Elite Solid Stain in Chestnut brown.

When we put the stand in place, we realized we could add an additional shelf and add boards to the front to cover this mess of cords on the porch. All of that was assembled with brad nails.

Note: In hindsight, we would have placed that bottom shelf lower so that anything stored there would be hidden out of sight.

We used cactus potting soil to plant our succulents and then we put them in place in the stand.

Here you can see how the stand hides away all those cords and the outlet. The stand is light enough to move out of the way when that outlet needs to be used.

Note: The stand would be considered a tip-over hazard so it should be secured to the wall if you have ANY concerns about small children or animals being able to pull it over. You can install a furniture anchor to make it safe for your space.

For more details please visit our website!