Simple Skateboard

This is a simple skateboard

Step 1: Make the Basic Board of Skateboard Board

The plate comes in four sizes:

4×10/45/1 boards with a 90 degree curve on one corner (corner piece)

2×90/20/1 boards (sides)

2×20/45/1 boards (heads)

1×90/20/1 board (body)

Step 2: Assemble the Board

First combine into left, middle and right three large board surface, make left, right and two board warped about 10°, combine into skateboard surface

Step 3: Make the Wheels

Wheel specification: radius 5, wall thickness 5, width 4.

Make four identical wheels

Step 4: Make the T-axis

Specification: the lower axis is a cylinder with a radius of 2.5 and a length of 34. It is cut into a prism with a triangular pyramid. At last, a cuboid 30 long, 7 wide and 1 high is made

Step 5: Combine the T Axis With the Wheel As a Whole

combine the T axis with the wheel as a whole

Step 6: Combine the Board and the Assembly

combine the board and the assembly

Step 7: Make the Words Speed and Cool

Make it suitable size and 0.5 height, and print it on the surface of slide plate

Step 8: Make the Star Symbol and the "G" Character

Make it suitable size, height 0.5, printed on the surface of the skateboard