Simple Safety Razor Holder

A constant problem for the safe disposal of the shaver. It must be protected from falling, not to mention the integrity of the cutting edge.

I suddenly had an idea

I cut a discarded copper faucet.

Because the neighbours are disturbed by noise
so I had to manually sawing.

Therefore, the cut was a half-heart-ed.

i use drill
felt wheels + green polish

if not available, toothpaste also good

WARNING!!!

I would like to draw attention to the use of protective goggles!!!

+

Leather safety gloves!!!

I want to stop the oxidation.

The tests show that the short-handled razor takes you safely.

The bottom bracket was even a small sponge, from mouse pad.

A felt-tip pen cap is pushed into it, to be protected with razor stems from scratches.