Simple Phone Stand

I could never multitask while using my phone so I came up with a simple solution. I made my self a phone stand. Its simple, easy to make and wont cost you any money.

this is the view from one of the sides and the gap at the far end is

This is the basic shape of the design and its not very hard to copy but do make adjustments if you want to.

I used Autodesk to draw the design and used a computer guided laser to cut the piece out. I also put my name on the middle of the piece and you can do the same or put a cool design if you like.

I have a big phone so i made the opening a little wider but for you you can change or adjust it to your liking.