Simple Pc Case Mod

So i got this old pc case , lets make it fancy :)

First of all this project is old one so i dont have lot of photos , start with clean it and remove all parts you can like the plastics in the front.

At this picture cut off the rear part and adjuct this metal thing to take some air. ( this metal thing is used to fireplaces) use a drill to adjuct it.

When you have clean it cover tha parts you dont want to painted , like the inside of the case. I used some old paper and duct tape (my best friend :P )

Now use some sandpaper to the parts you want to paint , this takes all the dirt from the metal case. Dont use sandpaper at the plastic parts.

I used two spray cans black and blue. I used the blue one for the metal parts and some parts from the plastic front part.

Now put all the parts back , i used already black plastics for the front part and black lg driver!

And now is ready ! with a little sandpaper , duct tape, spray cans i made this old case like new!!

Sorry for my poor english guys :/

Anything you want to ask just message me or comment anything you want :)

Hope you like it guys more are coming !

See ya !!