Simple Leather Frisbee
![image.jpg](/proxy/?url=https://content.instructables.com/FEH/5SO3/KRKN47RK/FEH5SO3KRKN47RK.jpg&filename=image.jpg)
![143B3E2D-28A5-437F-A0CE-1678F186BD64.jpeg](/proxy/?url=https://content.instructables.com/FP5/UXSF/KRKN47NG/FP5UXSFKRKN47NG.jpg&filename=143B3E2D-28A5-437F-A0CE-1678F186BD64.jpeg)
this frisbee is an extremely fast flier and if not thrown flat, will have a curve to its flight.
Downloads
Supplies
- cardboard
- Leather
- Hot glue gun
- Modge podge
Body
![D553CAAA-7615-4051-8937-E7FC0E4DABC6.jpeg](/proxy/?url=https://content.instructables.com/F9A/MPEH/KRKN47NB/F9AMPEHKRKN47NB.jpg&filename=D553CAAA-7615-4051-8937-E7FC0E4DABC6.jpeg)
- on a pice of cardboard, draw a circle around a plate. (I think it will be more stable if larger.)
- Draw a smaller circle in the middle of the larger one.
- Cut them out.
Top
![2F0E2876-41B0-4B1A-82C1-8D1BA0451D70.jpeg](/proxy/?url=https://content.instructables.com/FCF/M2RU/KRKN47NC/FCFM2RUKRKN47NC.jpg&filename=2F0E2876-41B0-4B1A-82C1-8D1BA0451D70.jpeg)
- draw a circle on a piece of leather. (The same size as the large one)
- Cut it out
Attaching
![80FECE7C-0D54-4EFB-A2BF-85E9CA9352AF.jpeg](/proxy/?url=https://content.instructables.com/F8Y/F0QI/KRKN47NF/F8YF0QIKRKN47NF.jpg&filename=80FECE7C-0D54-4EFB-A2BF-85E9CA9352AF.jpeg)
- glue the cardboard to the leather and trim off anything extra.
- Glue in the holes along the outside of the cardboard.
Finishing
![image.jpg](/proxy/?url=https://content.instructables.com/FY7/VHF8/KRKN47RE/FY7VHF8KRKN47RE.jpg&filename=image.jpg)
- Paint or color any design.
- apply modge podge.
- Have fun!