Simple Leather Cardholder

Hi, leathercraft folks! This is Hahn.

I made a super simple and easy minimalist cardholder

[Material & Thickness]
Leather : Buttero / Dakota Vegetable Tanned Leather (Italy) Thickness : 1.8t / 1.5t ( 5oz/ 4oz)

I used thick paper for the leather pattern.

Print as actual size then, paste to thicker paper.

Cut the leather follow the pattern, then crease and bevel the edge line

I used edge finisher and sponge

I used Tokonole(Leather gum) and used wood slicker for burnishing edge

Mark with an awl on the base leather panel.

then glue and paste the card slot panel.

Before assembling, dye the back side of the leather.

Cut the base panel then stitching .

+ beveling, dying, burnishing process again.

and It's done already.

Thanks for watching! :)