Simple LEGO Keyholder
simple lego key holder
What You Need
16x2 base plate
two 2x2 squares
four 1x6 pieces
a 2x3 piece with a hole
and a command strip
remember this is customizable so feel free to use any color
two 2x2 squares
four 1x6 pieces
a 2x3 piece with a hole
and a command strip
remember this is customizable so feel free to use any color
Step 2
Place The 2x2 Squares On The Ends Of The Baseplate.
Step 3
place the 1x6 pieces in the center however you would like them. I chose to do it this way.
Step 4
peel off one side of the comman strip and place it on the back.
Step 4
attach the 2x3 piece with the hole on your keychain like you would put a key on.
Step 6
peel off other side of command strip and attach it to where you want it.
You Are Finished
now attach your keys