Knex Scope

This is my first of my knex gun accetories and my first instructables. It is a knex assault sight and is not meant for sniping. Fortunatly, there is less than 50 pieces. So I'll say that it is for beginers. It has two fastenars for rods or connectors.It is pretty simple to make.
Pic 1 the sight whit the connector fastenor.
Pic 2 the sight with the rod fastenor.
(Sorry for the spelling)

Yes, I did make the parts little.

Connectors:
White full moon: 15
Orange: 2
Grey one pronged: 5

Rods:
White: 4
Red: 1
Green: 1

Other:
Y clips: 4

This is the base

1. What you will make
2. Make those two thingies
3. Make that
4.Put it together (please note the directions of the thingies)
5. Not on the picture but add the white rods to the end of the tow orange connectors.

The looking piece

1. What you will make
2. Make that
3. Add that
4. Put those Y clips on.
5. Connect the base to the looking piece(note the directions)

Yay! You're done!
If there is problems or you're stuck, please PM me.
Thanks