Simple K'NEX Gameboy Stand
Hello everyone, this is my fisrt instructable. I am going to show you, how to make a Simple K'NEX Gameboy Stand
Gathering the Materials
You will need:
5 orange connectors
2 red connectors
2 gray connectors
3 blue rods
2 red rods
Rubber tube (optional)
X-Acto knife (optional)
And of course your shiny GameBoy *.*
5 orange connectors
2 red connectors
2 gray connectors
3 blue rods
2 red rods
Rubber tube (optional)
X-Acto knife (optional)
And of course your shiny GameBoy *.*
First Step
Fit all the pieces together, like you see on the pictures.
Second Step, Rubber Tube (optional)
For the sake of my GameBoy doesn't slip from the stand, i added the rubber tube. This part is optional, but it is best to add it
------------
Cut 4 pieces of rubber tube and then cut them in one side.
Fit the rubber tube like in the pictures
Put the GameBoy on the stand and admire it *.*
And that's it
------------
Cut 4 pieces of rubber tube and then cut them in one side.
Fit the rubber tube like in the pictures
Put the GameBoy on the stand and admire it *.*
And that's it