Simple Duct Tape Cup

Hello today im going to try to teach you how to make a simple duct tape cup ideal for

What youre going to need is

1 box cutter and or scissors

a cup or cylnder to mold around

and of course DUCT TAPE

When you use youre cup or cylinder i find easier to have it open on both ends so it is easier to remove

Now that you have your cup or cylinder (in my case i used a pringles snack can) you need to wrap the duct tape sticky side out around the cup or cylinder. and keep in mind that you should youse strips of duct tape like in the picture. please do this until you are to the edge of the cylinder.

BTW: dont be afraid to layer over the strips

By the time your done it should look like these first two pictures. after youve made sure its wrapped up right you make a cross over the top like it is shown on the thrd picture. after that i would like you to make another cross angled over it like in the fourth picture. when thats done and you have a double opened cylinder you can look inside to see if it is done right 

now i want you to do the same things you did on the first steps except with the sticky side in. 

                     IF YOU NEED HELP YOUSE PAST STEPS AND THESE PICTURES FOR GUIDANCE

Now for the final step just crab the cup or cylinder and try to slide/pull it out then you finally have your cup

                 I Hope You Injoyed This Instructable And Any Helpful Critiscism Or Improvements Are Welcome