Simple Can Lamp

by solomonocheni4 in Circuits > LEDs

237 Views, 2 Favorites, 0 Comments

Simple Can Lamp

IMG_20221119_191125.jpg
IMG_20221119_204515.jpg

After you finish your drink, you dispose off your can in the recycle bin right?

Have you thought of recycling those cans yourself. I share with you how to make a very simple lamp for beautifying your home and emergency.

Supplies

IMG_20221119_115719.jpg

Materials


Can

LED

Cardboard

3.7v battery

Switch

Wires

Glue

Tools

Scissors

Soldering iron (to make your work neat)

Cut the Can

IMG_20221119_120158.jpg
IMG_20221119_120212.jpg
IMG_20221119_120901.jpg

Cut the can as shown in the pictures with scissors. Be careful to avoid injury. Make an opening at the bottom of the can to accommodate the LED. It should be wide enough to avoid shorting the circuit.

Assembling

IMG_20221119_121011.jpg
IMG_20221119_121244.jpg
IMG_20221119_131327.jpg
IMG_20221119_132505.jpg
IMG_20221119_191611.jpg

Pierce a little piece of cardboard and glue the LED sticking the legs out on the other side. Glue the cardboard to the can as shown. Solder wires to the switch and then to the battery.

Testing

IMG_20221119_204515.jpg

Check for any short at the soldering points and test the lamp. Mine was very bright and fun to use.