Shiny Wallet

This will show you how too make an awesome shiny wallet.

It has the normal wallet features, a bill pocket and four credit card pockets

Supplies:

You'll need glittery/shiny laminate, (i got mine at a laminate specific store, you can probably find it at some craft stores.)

Cut 10 pieces out with the following measurements:

1. 7 1/2 x 6 in.
2. 11 x 4 in.
3. 7 1/2 x 3 in.
4. 7 7/8 x 4 in.
5. 3 2/8 x 3 in.(two of these.)
6. 4 x 3 in.(two of these)
7. 2 1/2 x 2 1/2 in. (two of these.)

You'll notice each one is numbered, that's important.

Tools:

• scissors
• ruler

First Take part 1 peel the backing off and carefully fold it in half.

Line piece 2 up with piece 3 as shown but do not stick them together yet.

Cut out the corners on piece 2 where 3 touches.

Now peel off both 2 and 3 backing and stick there sticky sides together.

Lay piece one in the middle of the first part of the pocket, lined up with the top.

Now fold all the edges in.

and now you got the bill pocket!

Get pieces 4 and 5.

These will be credit card pockets on the sides of the wallet

Lay the 5s on 4 as shown. (don't stick yet)

Now peel 4 and 5 baking of and stick the sticky sides together, line them up in accordance with step 8.

Place the main part of the wallet on top of the credit pockets and fold the flaps on the top and bottom in on the wallet.

Now you're finished with the side pockets!

Now we'll be adding the front card pockets, for this you need pieces 6 and 7.

Like before lay the pieces out as shown, then peel and stick the backs together.

Stick the finished parts on the front of the wallet, keep the open ends centered.

Now your finished!

Use it, give it away, enjoy!


Bonus uses.

• Weak signal mirror
• Cut eye holes in it, not-so-low-profile glitter mask!
• Ward off enemy's by blinding them
• Hang from ceiling, Disco ball!