Servo Motor With 10 LED's
in this video i will be showing you how to lit up LED's together with a the rising angle of the servo motor i hope that you like this instrucables!
Watch the Video!
Watch the Whole video to get a grasp what my instructables is.
Order Your Components!
On this step this are the components that i used on this project.
- SG-90 5V Servo Motor x1
- 5mm LED (BLUE) x10
- 100 Ohm Resistor x1
- Arduino Uno x1
- Arduino Pro Micro x1
- Solderless Breadboard x1
- Jumper wires
Note: Be minded that i used Arduino Pro Micro for this project because im using breadboard in my demonstration but you can also use the traditional Arduino Uno for this project because Uno and Micro are the same!
Do the Wiring!
Connect everything according to this schematic Diagram!
Programming!
okay if your only interested in the code then download it. But if you want explaination go watch the video in step 1 i explained how to code works there.
Downloads
You Did It!
if you successfully created my instructables then Congrats your awesome man! And if youre reading this right now kindly subscribe to my channel and hit the notification bell for me to be able to prodice more video in the future! Well then i will see you next time!