3D Servo Cart and Wheels

by Hammock Boy in Workshop > 3D Printing

1284 Views, 2 Favorites, 0 Comments

3D Servo Cart and Wheels

Screen Shot 2012-10-17 at 4.40.31 PM.png

Screen Shot 2012-10-17 at 4.40.25 PM.png

Screen Shot 2012-10-17 at 4.40.14 PM.png

Screen Shot 2012-10-17 at 4.39.57 PM.png

Screen Shot 2012-10-17 at 4.39.52 PM.png

Screen Shot 2012-10-17 at 8.00.08 PM.png

Screen Shot 2012-10-17 at 7.59.54 PM.png

Screen Shot 2012-10-17 at 7.59.48 PM.png

Screen Shot 2012-10-17 at 7.57.41 PM.png

Screen Shot 2012-10-17 at 7.57.30 PM.png

This is a 3D file created in Sketchup that provides a chassis for 4x Sparkfun Large Full Rotation Servos.
The dimensions are 14cm x 9cm x 4cm. The holes are meant for 4-40 screws.
~~I am hoping to make wheels for it as well on a 3D printer instead of using standard servo wheels that you can buy.~~

The wheels attach to a servo horn instead of directly to the servo. It is 6.5mm wide with a diameter of 70mm (roughly 2.75inches).

The stl viewer is a new find that I really like. Check out Pleasant3D

The stl and skp files are attached in the zip file.

Downloads

Wheels.zip

Servo Cart.zip