Self Defense Electric Taser

We live in a society, where 'crime-rate' is increasing day by day, it is not possible to carry a knife or other self defense weapons everywhere at all the time, so here is how you can build your own 'Electric Taser'.

1. Zap Racket.

2. Screw Driver.

3. Hot Glue Gun.

4. Wire Cutter.

5. Cutter.

6. Screws ( 45 mm long).

remove the wire mesh from the circuit carefully, and cut the three wires connecting the wire mesh, without removing or disturbing any other component, circuit or equipment inside the plastic case of zap racket

cut on of the three wires connecting to wire mesh from which the wire mesh was separated lately and connect those two wires ( + and - ) to the 45mm long screws at flat end ( top ) and secure the connection with hot glue.

complete the assembly by placing the both ends of nails (i.e. + & - ) to the top of case and maintain a gap of 10 mm between them. secure this by the retained screws of plastic casing of zap racket and hot glue.