SecaZap
by César Andrés Rodríguez Calderón in Workshop > 3D Printing
27 Views, 0 Favorites, 0 Comments
SecaZap
My project solves a very common issue for people who don't have access to a rooftop or a sunny spot. Usually, when it rains, our shoes get wet, and it's really tedious not having a safe place to let them dry, as they leave a rather annoying puddle of water, whether in the bathroom or in your room. That’s why SecaZap was created, giving you a safe space to contain the water dripping from your shoes, allowing them to dry in the best possible way.
Supplies
3D printer filament, 3D printer
Sketched
I created a sketch that must meet the expected expectations of the product.
CATIA
I used the CATIA software to create my product.
UltiMaker Cura
To print in 3D, it is necessary to save the file in STL format in order to load it into the software used by the printer, called UltiMaker Cura, which is used to make final adjustments to the scale, speed, and thickness of the print, and then proceed with printing.
Printing
In the end, this was the result of the printing, which serves as a scale prototype.