Scrunch Dyed T-Shirt

by dharmatradingco in Craft > Fiber Arts

1077 Views, 12 Favorites, 0 Comments

Scrunch Dyed T-Shirt

header.jpg

How to Make Your Scrunch Dyed T-Shirt:

Scrunch it up and dye it. It's that simple, really, and the results are great!

Let's Get Started!

Scrunched_T_2f.jpg

Shopping list:

One Feminine Fit Softee

2 tsp. each Dharma Fiber Reactive Dye - #51 Plum Blossom and #19A Lilac (#PR51-2, #PR19A-2)

3 Tbl. Soda Ash Fixer

4 16 oz. Dixie cups

Prepare Your Shirt.

Scrunched_T_3f.jpg

Step 1: Thoroughly wet and wring out shirt.

Step 2: Tightly pack shirt into a 16 oz. cup creating as many folds and wrinkles as possible.

Add the Dye Powder.

Scrunched_T_4f.jpg
Scrunched_T_5f.jpg

Step 3: Spoon about 2 tsp. of each color dye into 2 separate cups, add a small amount of water to make a paste, then add about 1 cup of water to each cup making sure the dye is thoroughly dissolved.

Step 4: With a container of dye in each hand slowly pour equal amounts of dye down the opposite sides of the cup, filling cup almost to top.

Step 5: Without disturbing the folds of the shirt, gently push in a up and down motion to get the dye distributed throughout the shirt.

Step 6: Place another cup into the "cup of shirt" and weigh it down to keep the shirt scrunched.

Leave Overnight and Wash.

Scrunched_T_6f.jpg

Step 7: Leave overnight.

Step 8: Mix about 3 Tbl. of soda ash into about 1 cup of hot water, mix to dissolve.

Step 9: Pour the above fixer over "cup of shirt" and let sit for about 1 hour.

Step 10: Pour out dye/fixer solution and wash shirt with cold water and cap full of Synthrapol. Then wash again with warm water.

Dry It and Show It Off!

Scrunched_T_final_f.jpg

Step 11: Dry the shirt and you're ready to go!