Screwdriver Rope Sling
Whenever I am working in the top of our barn or on top of it, I've wished I could hang my drill motor from my belt instead of looking for a place to set it and keep it from falling. So I came up with this idea. I'm not saying this is completely my idea because I might have heard it some wheres else. Anyhow I'm thought this might give you some ideas.
Tools
Your need:
1. scissors
2. matches or a lighter
1. scissors
2. matches or a lighter
Required Elements
Some paracord, a carbineer and of course your drill motor.
The Sling
The length is up to you but mine was about 2 feet long. Start a square knot but before you tighten it hook your carbineer though the middle, then tighten it hard.
Next ,take and cut of the extra. Do it one at a time to keep it from undoing itself. Take your matches and melt the ends to keep them there.
Next ,take and cut of the extra. Do it one at a time to keep it from undoing itself. Take your matches and melt the ends to keep them there.
Wrap Up
Wrap it around and then slip it though its self and pull it tight.
Finished!
From the photos you can see I made two versions if it. Of course the length is up to you.
Let me know what you think!
If you can think of a better name for this let me know!!!!!!!
Let me know what you think!
If you can think of a better name for this let me know!!!!!!!