Screw and Bolt Toy

This Instructables will show you how to make a screw and a bolt toy.

Start with a 25 mm cylinder.

Next you want to put a 22 mm wide cylinder in the 25 mm wide cylinder. The 22 mm wide cylinder will be longer then the 25 mm wide cylinder. Your design should start to look like a screw.

You then want to select the 22 mm wide cylinder and hit the thread button.

We are going to make the bolt now. Start with a 25 mm cylinder. This cylinder should be the same size at the one we started with before.

You want to then put a 22 mm cylinder inside the 25 mm cylinder you just made. Hit the thread button on and select the 22 mm cylinder.

You want to cut the threaded 22 mm cylinder from the 25 mm cylinder. This will make it so that there are threads inside the 25 mm cylinder.