Scrappy 3 Legged Lamp
![00x0x_19jmZs4FzZC_300x300.jpg](/proxy/?url=https://content.instructables.com/FVB/8FZK/IQYSXV3O/FVB8FZKIQYSXV3O.jpg&filename=00x0x_19jmZs4FzZC_300x300.jpg)
![00I0I_e8elcGwXmle_300x300.jpg](/proxy/?url=https://content.instructables.com/FT1/2D44/IQYSXV3W/FT12D44IQYSXV3W.jpg&filename=00I0I_e8elcGwXmle_300x300.jpg)
![00R0R_4KItnguAbOK_300x300.jpg](/proxy/?url=https://content.instructables.com/FZA/A9Q7/IQYSXV3U/FZAA9Q7IQYSXV3U.jpg&filename=00R0R_4KItnguAbOK_300x300.jpg)
![00101_iFJAyBX2WnC_300x300.jpg](/proxy/?url=https://content.instructables.com/F2V/O3YS/IQYSXV3T/F2VO3YSIQYSXV3T.jpg&filename=00101_iFJAyBX2WnC_300x300.jpg)
![00h0h_1wgyncgeIxW_300x300.jpg](/proxy/?url=https://content.instructables.com/FQB/TASW/IQYSXV3V/FQBTASWIQYSXV3V.jpg&filename=00h0h_1wgyncgeIxW_300x300.jpg)
![00R0R_iDWRYGG8HPi_300x300.jpg](/proxy/?url=https://content.instructables.com/FDP/FMUX/IQYSXV3X/FDPFMUXIQYSXV3X.jpg&filename=00R0R_iDWRYGG8HPi_300x300.jpg)
![00X0X_o2JzJhyrmi_300x300.jpg](/proxy/?url=https://content.instructables.com/FQ1/TOB2/IQYSXV3Q/FQ1TOB2IQYSXV3Q.jpg&filename=00X0X_o2JzJhyrmi_300x300.jpg)
I am new to welding and this is my first project. I collect anything I "know I will find a use for" and my garage was getting a bit full. I began a welding class through the local arts institute and decided to 'clean' my garage a bit. I found cobblers shoe forms, rusty chain, old saw blade, vintage gauge and some other odds and ends.
I welded the chain legs straight and then attached the cobblers shoe forms. Leveling the saw blade was not the easiest task for a newbie, but with some suggestions from my instructor and a very nice chop saw, we got it done.
I had a great time making this lamp and learned a lot by having to grind off bad welds along with redoing crooked welds. It turned out great and I love it!!!! I hope you do too.
Donna