Scrape Free

Keep your car "Scrape Free" with our product! Who likes to listen to the bottom of their car bumper screech when it scratches a curb or parking lot bumper. Follow the step by step guide to become "Scrape Free"!

Ping Sensor
Ping stand with hardware
68 inch 3 wire F-F extension cable (2) a.k.a female
3pin single row header (2) a.k.a male
9 volt battery
Back lite LCD screen
Electrical wire
Bread board

Assemble the Ping sensor to the Ping stand. Put the small washer on the screw, then put the screw through the ping sensor from the back, then slide the 1/4" washer on and then screw into the ping stand and secure it tightly as show.

Connect LCD to Bread board with female to female extension wire. 3 pin male/male, 9 volt battery.

Run 3 electrical wires 
White to P15
Red to Vdd
Black to Vss

Connect Ping sensor to bread board with female to female extension wire.

Run 3 electrical wires
White to P1
Red to Vdd
Black to Vss

Run codes in basic stamp 2.5.

Screw to grill and mount LCD screen to In-Dash