Save Deodorant
![IMG_6834.JPG](/proxy/?url=https://content.instructables.com/F00/R8KP/JD2FC941/F00R8KPJD2FC941.jpg&filename=IMG_6834.JPG)
Hi Gang:
I know stick deodorant isn't very expensive, but I hate to see any left over when I throw the case away. I use it until I'm almost shaving my armpits with the edge of the case. So I've tried various ways to pull the last bit out and save it. At first I would dig the remainders out and put them on top of the next case. This didn't work great, but I found a better way.
Open the Case and Get the Stuff Out
![IMG_6841.JPG](/proxy/?url=https://content.instructables.com/F78/WFDE/JD2FC9DD/F78WFDEJD2FC9DD.jpg&filename=IMG_6841.JPG)
![IMG_6844.JPG](/proxy/?url=https://content.instructables.com/FEI/PVS1/JD2FC9DT/FEIPVS1JD2FC9DT.jpg&filename=IMG_6844.JPG)
Well in the past it was as easy as turning the adjuster until the last bit came out. But this time it wouldn't budge! So I found that under the adjuster was a white cap that I popped out. Then I could cut the screw free from the knob with my pocket knife so the platform would come out with the remaining deodorant. Then I could see why it wouldn't budge, the screw had a relief so it wouldn't push up any more, and also had a knob so it wouldn't release the platform. Designed to fail and also to prevent you from using all the deodorant!
Platform With Deodorant
![IMG_6838.JPG](/proxy/?url=https://content.instructables.com/FTV/NG4I/JD2FC97N/FTVNG4IJD2FC97N.jpg&filename=IMG_6838.JPG)
![IMG_6840.JPG](/proxy/?url=https://content.instructables.com/F7N/ZL4L/JD2FC9D5/F7NZL4LJD2FC9D5.jpg&filename=IMG_6840.JPG)
So here is the platform and screw with the deodorant. I put it on the scale and it weighed 22g. Then I put it in a plastic measuring cup so I could melt it off in the microwave oven. ( Don't ask me why you shouldn't use an aluminum cup! ) After melting off the platform it only weighed 5g, so there were 17g of deodorant I saved, 32% of the promised 52g!
Prepare the New Case
![IMG_6835.JPG](/proxy/?url=https://content.instructables.com/F66/YOW5/JD2FC96H/F66YOW5JD2FC96H.jpg&filename=IMG_6835.JPG)
![IMG_6836.JPG](/proxy/?url=https://content.instructables.com/FJQ/40O0/JD2FC96P/FJQ40O0JD2FC96P.jpg&filename=IMG_6836.JPG)
So I took the new deodorant case, ran the deodorant up so I could score the top with my knife. This will help the melted deodorant bond to the new. Then run the platform back down.
Pouring Into the New Case
![IMG_6839.JPG](/proxy/?url=https://content.instructables.com/F1T/3MUL/JD2FC9CW/F1T3MULJD2FC9CW.jpg&filename=IMG_6839.JPG)
So I put the plastic measuring cup ( did I tell you why it should be plastic? ) in the microwave with the platform and the wasted deodorant. 10 to 15 seconds will melt the deodorant, I did 5 seconds at a time until it all melted. Then just pour the melted deodorant on top of the old and let it cool off. Don't hurry here, it take a few minutes.
All Done, Ready for Tomorrow Morning!
![IMG_6843.JPG](/proxy/?url=https://content.instructables.com/FQX/8BNS/JD2FC9DS/FQX8BNSJD2FC9DS.jpg&filename=IMG_6843.JPG)
So there it is: 17g of deodorant saved! And with a full stick at over a dollar I saved maybe 40ยข!!
Hope you enjoyed this Instructable and have fun.
Be safe out there!
Carl.