San Diego LDS Temple - Taito 3D Printing Services

3D Printed San Diego LDS Temple (with Lights)

LED - https://www.netram.co.za/led/9881-led-3mm-white-10-pack.html

Filamnet - https://www.3dprintingstore.co.za/boksburgstore/wanhao-pla-filament-1kg-1-75mm-white.html

Filament - https://www.3dprintingstore.co.za/boksburgstore/wanhao-pla-filament-1kg-1-75mm-transparent.html

SketchUp - https://www.sketchup.com/try-sketchup

Battery - https://www.diyelectronics.co.za/store/li-ion-li-po/2439-lipo-battery-37v-1200mah-1c-1cell.html

Battery Charger - https://www.diyelectronics.co.za/store/battery-charger/1195-1a-lithium-battery-charging-module-with-protection.html?search_query=battery+charger&results=77

Switch - https://www.robotics.org.za/SWITCH-88-LOC

3D Printing Services

I used SketchUp to design the file. The windows are made out of clear filament. I've grouped the windows together, so please explode them from the rest of the design.

The base of the model is attached to the rest of the model via a nut and bolt set (you can use a soldering iron as well). The bolt is attached to the model via a soldering iron (you can use glue if you wish, but it's risky).

Solder the battery the LEDs, the switch and the battery charging module to the circuit.

I used a soldering iron to attach the windows to the model (you can use glue if you see fit).

Final Images.