*SUPER EASY* Nerf Mega Magnus BlackOps Paintjob With Removable Silencer

by OrangaCHANG in Outside > Launchers

2361 Views, 9 Favorites, 0 Comments

*SUPER EASY* Nerf Mega Magnus BlackOps Paintjob With Removable Silencer

WP_20160205_13_30_07_Pro_LI.jpg
WP_20160205_13_32_09_Pro_LI.jpg
WP_20160205_13_32_29_Pro_LI.jpg
WP_20160205_13_33_15_Pro_LI.jpg
WP_20160205_13_33_28_Pro_LI.jpg
WP_20160205_13_34_52_Pro_LI.jpg
WP_20160205_13_35_09_Pro_LI.jpg
WP_20160205_13_35_17_Pro_LI.jpg
WP_20160205_13_35_45_Pro_LI.jpg

In this instructable, we will be giving a nerf mega magnus a sleek black paintjob and a removable silencer.

Gather Your Materials!

WP_20160205_13_32_09_Pro_LI.jpg

These are the materials you will need:

  • black spray paint
  • x-acto knife
  • scissors
  • drill
  • (optional) masking tape
  • super glue
  • empty film canister

Spray Away!

WP_20160205_13_32_29_Pro_LI.jpg

Tip: cock your gun halfway before painting.

Make the Silencer!

WP_20160205_13_34_52_Pro_LI.jpg
WP_20160205_13_33_28_Pro_LI.jpg
WP_20160205_13_33_15_Pro_LI.jpg
WP_20160205_13_35_09_Pro_LI.jpg

1. Use the x-acto blade to cut the closed end of the canister as evenly as you can. You can clean up the edges with the scissors.

2. Use the drill to make 5-10 holes around the sides of the canister.

3. Cut a circle out of the lid, and glue it to the muzzle of your gun.

Finished!

WP_20160205_13_35_45_Pro_LI.jpg

In less than 15 minutes (excluding drying time) you have a custom Mega Magnus ready for nite-ops. To attatch the silencer, just put it onto the lid you glued on.