STOP! Board Slipping While Glueing!
by american graphitti in Workshop > Woodworking
1224 Views, 7 Favorites, 0 Comments
STOP! Board Slipping While Glueing!
![IMG_0481.JPG](/proxy/?url=https://content.instructables.com/F2S/IM17/JJT6O3IP/F2SIM17JJT6O3IP.jpg&filename=IMG_0481.JPG)
If you have ever used wood glue to glue up 2 pieces or more together. Than you know the struggle of your boards slipping and sliding around on you. It seems to be on the last little squeeze you put on with the clamp. You go from lined up to off. This can be frustrating beyond belief!!! So here is how you take care of it......
The Crazy Secret.....
![IMG_0481.JPG](/proxy/?url=https://content.instructables.com/F3Z/8EJU/JJT6O3QQ/F3Z8EJUJJT6O3QQ.jpg&filename=IMG_0481.JPG)
Table salt.....
Table Salt...
![IMG_0482.JPG](/proxy/?url=https://content.instructables.com/FAH/FFRT/JJT6O3IQ/FAHFFRTJJT6O3IQ.jpg&filename=IMG_0482.JPG)
![IMG_0483.JPG](/proxy/?url=https://content.instructables.com/F0O/ATAB/JJT6O3IR/F0OATABJJT6O3IR.jpg&filename=IMG_0483.JPG)
![IMG_0484.JPG](/proxy/?url=https://content.instructables.com/FCS/RFHS/JJT6O3IT/FCSRFHSJJT6O3IT.jpg&filename=IMG_0484.JPG)
![IMG_0485.JPG](/proxy/?url=https://content.instructables.com/F10/NDXG/JJT6O3IW/F10NDXGJJT6O3IW.jpg&filename=IMG_0485.JPG)
Yes! just a sprinkle of table salt! I know sounds ridiculous! put your wood glue on as you normally would. Then just sprinkle a little salt on the edge of the glue! then line up your pieces and clamp down! guess whats NOT slipping around on you now! So simple it feels like there should be something wrong! It has saved me a lot of trouble!
Thanks for Checking This Out!
Thanks for taking the time to check this out and I hope it is helpful for you! If you liked this please vote for me! I would love a new drill but I would be grateful just to get a T-shirt! Thanks again!!!!