STEMFIE Desktop Christmas Tree

by Stemfie3D in Workshop > 3D Printing

377 Views, 0 Favorites, 0 Comments

STEMFIE Desktop Christmas Tree

SPS-000002_Desktop_Christmas_Tree_assembly_step0_(stemfie.org)_main_rectangular_w_text.jpg
STEMFIE Desktop Christmas Tree - On table (stemfie.org SPS-000002).jpg

This STEMFIE project builds a small Christmas tree you can assemble in under 15 minutes and decorate using coloured STEMFIE fasteners.

Download and 3D-print the Ready-made Build Plates

Use standard print settings on filament-based 3D-printers, such as the following:

  • Material: PLA filament
  • Layer height: 0.2 mm
  • Perimeters (shells): 2
  • Top solid layer count: 4
  • Bottom solid layer count: 4
  • Infill: 15%
  • Generic print speed: 50 mm/s

Downloads

SPS-000002 - Desktop Christmas Tree - Braces - Green (stemfie.org).stl
SPS-000002 - Desktop Christmas Tree - Foot - Gray (stemfie.org).stl
SPS-000002 - Desktop Christmas Tree - Nuts - Coloured (stemfie.org).stl
SPS-000002 - Desktop Christmas Tree - Screws - Green (stemfie.org).stl
SPS-000002 - Desktop Christmas Tree - Star - Yellow - Instructions (stemfie.org).stl
SPS-000002 - Desktop Christmas Tree - Washers - Brown (stemfie.org).stl

Assemble the Foot

SPS-000002_Desktop_Christmas_Tree_assembly_step1_(stemfie.org).jpg

Insert Four Washers and the Four Largest Braces

SPS-000002_Desktop_Christmas_Tree_assembly_step2_(stemfie.org).jpg

Inser the Rest of the Brace As Shown, Placing One Washer in Between

SPS-000002_Desktop_Christmas_Tree_assembly_step3_(stemfie.org).jpg
SPS-000002_Desktop_Christmas_Tree_assembly_step4_(stemfie.org).jpg
SPS-000002_Desktop_Christmas_Tree_assembly_step5_(stemfie.org).jpg

Fasten the Star at the Tip of the Tree

SPS-000002_Desktop_Christmas_Tree_assembly_step6_(stemfie.org).jpg

Rotate the Braces to Random Positions

SPS-000002_Desktop_Christmas_Tree_assembly_step7_(stemfie.org).jpg

Attach the Short Screws and the Coloured Nuts

SPS-000002_Desktop_Christmas_Tree_assembly_step8_(stemfie.org).jpg

The Final Assembled Christmas Tree - Enjoy!

SPS-000002_Desktop_Christmas_Tree_assembly_step9_(stemfie.org).jpg

For more information, please visit the STEMFIE project page at https://stemfie.org/sps-000002