☆ ROLLER STAMP(from Hairs Roller Tape ) ☆

by marcellahella in Craft > Printmaking

3023 Views, 66 Favorites, 0 Comments

☆ ROLLER STAMP(from Hairs Roller Tape ) ☆

DSC_1413.JPG
DSC_1419.JPG
I made this stamp roller with the hairs roller tape.
with it I made this bag. I used acrylic paint cause is cheap and I weren't shure of the results, but if you like it you can use fabric paint.

WHAT YOU NEED

DSC_1401.JPG
DSC_1397.JPG
MATERIALS:
-roller tape;
-sponge or rubber to make the stamps (mine is not really the better one but is what I found,is a kind of foam that don't absorb, I don't know the name; you can purchase some better kind);
-flat surface for pour paint;
-acrylic/fabric paint.

CUT SPONGE

DSC_1407.JPG
cut the sponge in to little pieces (like spots of animal fur ,for example)

STICK SPOTS

DSC_1402.JPG
remove a layer of tape from your roller tape and stick the spots all over it

DaMPEN ROLLER

DSC_1398.JPG
DSC_1403.JPG
put the paint on a flat surface and smear it;
dampen roller in the paint .

ROLL THE ROLLER

DSC_1404.JPG
DSC_1413.JPG
roll the roller on your fabric. do it all over and go back again where you left empty places

DONE

DSC_1419.JPG
you re done!
I have to say that the first bag I made didn't come out so well,  but you just need to get use to it, and try few times before do it on something you care about.
(when you are done using the pattern you make you can just remove the tape and you' ve got back your roller tape)